3000W Fiber Laser Cutting Table for 20mm Carbon Steel
ST-FC4020GA 3000W fiber laser cutter table is a high-power laser metal cutting machine, which is easy to cut 20mm carbon steel, as well as more thicker metals.

As we all know, carbon steel is hard to cut due to its high hardness. It is difficult to find an accurate high-speed cutting tool for carbon steel on the market. Plasma cutting metal is fast but rough. Waterjet cutting metal is precision but slow. Therefore, STYLECNC has launched a high-power fiber laser cutting machine to cut carbon steel of different thicknesses with high speed. This is ST-FC4020GA, which comes with a 3000W laser power generator option and powerful enough cut 20mm carbon steel or even thicker.
The metal fabrication business is booming, and more and more metal fabricators require high-power laser cutters to cut thicker metal materials. In this case, the emergence of ST-FC4020GA meets the needs of these users. Today, we tested the STYLECNC high-power laser metal cutter (ST-FC4020GA) in the factory for cutting 20mm carbon steel parts, resulting in clean and smooth cuts.
If you are engaged in metalworking and need to cut thicker metal materials, the ST-FC4020GA is a great option. You won't be disappointed with the cutting quality and speed.
You are welcome to visit our CNC laser machine manufacturing center at your convenience and seek your ideal precision metal cutting tool.
Share This Article With Others
Related Stories
2026-11-026 Min Read
Fiber laser air cutting uses dried, filtered compressed air, typically supplied at up to 16 bar, as the assist gas instead of bottled nitrogen. It cuts thin to medium mild steel, galvanized sheet, and thin aluminum at a gas cost of roughly $0.01 to $0.03 per cutting minute versus $0.20 to $0.40 for nitrogen. The trade-off is a slight oxide tint on stainless edges, so air wins on cost and nitrogen still wins where a bright, weld-ready edge is required.
2021-08-303 Min Read
It's necessary to improve the stability of laser cutting machine by cleaning lens, which allows laser cutters to last longer lifespan with higher precision.
2026-05-197 Min Read
A fiber laser cutting business can generate $5,000 to $25,000 per month by serving local machine shops, contractors, and direct-to-consumer metal product buyers. Startup costs range from $15,000 for an entry-level 1kW system to $80,000+ for a high-power industrial setup. Operators typically reach break-even within 4 to 8 months by combining subcontract cutting services with finished metal product sales at 40 to 60% profit margins.
2021-03-083 Min Read
Fiber laser cutting machine is a higher precision laser metal cutting solution compared to CO2 laser, YAG laser, CNC plasma cutter, and water jet cutting machine.
2025-06-127 Min Read
Are you looking for an affordable industrial laser cutting machine for commercial use in modern manufacturing? Review the 9 best industrial laser cutters to start or upgrade your business.
2022-07-283 Min Read
Are you troubled by how to set up a CO2 laser engraving cutting machine? We have summed up 12 easy-to-follow steps on how to assemble a CO2 laser machine with pictures & videos.