Fiber laser marking machine uses a laser beam to make permanent marks on the surface of various materials. The effect of marking is to expose the deep material through the evaporation of the surface material, thereby engraving exquisite patterns, trademarks and text.
STJ-30FM laser marking machine uses a fiber laser generator, which is stable in work, does not require cooling equipment during work, is simple to maintain, can be used after power up, is cheap, has a long service life, high conversion efficiency, and prints with thin lines.
This is a cross slide fiber laser engraving machine XY 2-axis moving table, including motor, X-axis base, lower mounting plate, ball protective cover, lead screw, table mounting plate, baffle mounting plate, guide rail, Y-axis base, fixed plate, slide rail , Coupling, work surface, baffle, mounting hole, limit plate, upper mounting plate, cabinet, computer monitor, galvanometer, optical path, lifting column, rocking wheel and cross slide.
The upper side of the machine is connected with a lifting column and a cross slide, the upper side of the lifting column is connected with a rocker, the left side is connected with a computer monitor, the right side is connected with an optical path, the front end of the optical path is installed with a galvanometer, and the upper side of the cross slide is provided with a Y axis Base, the upper side of the Y-axis base is connected with an X-axis base, both the X-axis base and the Y-axis base are provided with a screw and a coupling, the outer side of the coupling is connected with a motor, and the upper side of the X-axis base is connected with a lower mounting plate, The upper mounting plate and the table mounting plate, one end of the screw is connected with a ball protective sleeve, the right side of the table mounting plate is provided with a baffle, the upper side is connected with a work surface, the right side of the baffle is connected with a baffle mounting plate, and the Y-axis base is connected internally There is a guide rail, a slide rail is provided on the lower side of the X-axis base and a fixing plate is connected at the same time, a mounting hole is provided on the upper side of the table mounting plate, and a limit plate is provided on the right side.
Features and Advantages
1. Excellent beam quality: the divergence angle is 1/4 of that of the semiconductor pump laser. Especially suitable for precision and fine marking;
2. Low cost of use: the power consumption of the whole machine is less than 500w, which is 1/10 of the lamp pumped solid marking machine, greatly saving energy consumption;
3. Maintenance-free operation: The laser does not need any maintenance, and there is no need to adjust or clean the lens;
4. The laser generator has a long service life: using a laser diode as a pump source, its average working time can reach 100,000 hours;
5. Fast processing speed: The processing speed is more than 3 times that of the traditional laser marking machine.
Applications
Fiber laser marking machines are widely used in integrated circuit chips, computer accessories, industrial bearings, watches, electronic and communication products, aerospace devices, various auto parts, home appliances, hardware tools, molds, wires and cables, food packaging, jewelry, Tobacco and military affairs and other fields of graphics and text marking, as well as mass production line operations.
