4000W Fiber Laser Cutter System with IPG Laser Generator
ST-FC3015C fiber laser cutter adopts 4000W IPG laser generator, not only for thick metals, and also for reflective metals, including brass, copper, aluminium.
4000W fiber laser cutter systems with IPG laser source features:
1. Segmented welded tube bed, there are the strengthen beams in the middle of the bed, improve bed stability, prevent bed deformation.
2. Adopts aerospace standards, good, toughness, light weight, corrosion ressistance, anti-oxidation, low denisty, and greatly increase the processing speed.
3. Japan YASKAWA servo motor, Y axis 1.8kw double driver, ensure the machine work with high strenth and speed.
4. Germany Atlanta rack, long life, saving maintenance costs later.
5. Germany Neugart reducer, excellent noise control, excellent deceleration performance.
6. Adopts up and down exchange platform, Simple and practical, improve work efficiency
Samples of 4000W fiber laser cutter systems with IPG laser source:
Share This Article With Others
Related Stories
2024-05-105 Min Read
Laser cutting polycarbonate requires caution as many plastics are not suitable for thermal cutting. Let's do a safety analysis and find the best cutting tools.
2026-03-067 Min Read
Discover how AI, IoT integration, EV production, sustainability, and reshoring are transforming CNC and laser manufacturing. Data-driven analysis inside.
2026-08-185 Min Read
Brass and copper sit at the top of every list of metals that fight the laser. Solid copper reflects roughly 95 percent of a fiber laser's beam, brass is not far behind, and both once carried warnings in laser source manuals. Yet jewelry studios cut brass sheet daily, and busbar factories cut copper by the ton. This guide explains what changed, where the real risk lives, the minimum power that makes each metal practical, and the counterintuitive gas strategy that splits the two.
2026-08-135 Min Read
Yes, laser cutting galvanized steel is safe when the machine has proper fume extraction and filtration; it is unsafe without them. The zinc coating vaporizes into zinc oxide fume that causes metal fume fever if inhaled, so an enclosed machine with a high-flow exhaust and filter system, kept below the OSHA limit of 5 mg/m3 zinc oxide, is the deciding requirement. Never cut galvanized in an unventilated space.
2025-02-0514 Min Read
Need to know how thick of metal a fiber laser cutter can cut through? How fast are the speeds with various powers? Here's a guide for beginners and pros alike.
2022-05-173 Min Read
Looking for a laser cutter to start your business or pick up a hobby you've always wanted? Whether you are a beginner or CNC machinist, please follow the 26 steps on how to use a laser cutting machine.
