STJ6040 desktop laser cutter/laser engraver with CO2 laser tube is designed for small business or home business for cutting/engraving signs, logos, letters, numbers, patterns on wood, plastic, acrylic, rubber, glass, bamboo and other nonmetal materials.
Desktop Laser cutter/Laser engraver with CO2 laser tube can interface with a computer, allowing the user to lay out a design, insert type and scale the art as needed. If properly set up, the machine can execute a design perfectly, and repeat the process as many times as needed. Desktop CO2 laser cutters/Laser engravers can work on a variety of materials, including wood, plastic, paper and aluminum. The process is fairly quick and requires knowledge but not a great deal of skill, even though the level of detail and precision in the output may be at a very high level.
In contrast, traditional engraving is done with small hand held engraving tools, all of which must be carefully sharpened. Hand engraving is slow and exacting. Its done exclusively on metal. Laying out an image, with or without decorations or type, is tedious and difficult. Often, a laser engraver must practice for years to perfect his craft. But although the work is difficult, the results can be beautiful, whether as simple as an engraved wedding band or as complex and delicate as the portrait of George Washington on a dollar bill. The line quality is superior because hand tools can be controlled so well. So a CO2 laser engraver/laser cutter can make thick lines, thin lines, heavy lines and incredibly fine lines.
In a nutshell, desktop CO2 laser cutter/laser engravers are cheap, capable, flexible and work well with computers. Traditional engraving is a difficult craft to master and more limited in its uses.
Technical Parameters of desktop laser cutter/laser engraver:
|Power supply||AC 220V/110V|
|Working area||600*400 mm|
|Cutting speed||0-600 mm/s|
|Locating precision||<0.01 mm|
|Min shaping character||Character: 2*2mm, Letter: 1*1mm|
|Data transfer interface||USB 2.0|
|Cooling||Water Cooling and protection system|
|Graphic Format Supported||BMP, JPEG, PLT, CDR, AI, TIFF, PCX, DIB, TIF|
|Compatible software||CorelDraw, WinsealXP|
Applications of desktop laser cutter/laser engraver:
Cloth, leather, toys, computer embroidery cutting, mould, crafts, bamboo and wood, advertising and building decoration, packaging and printing, paper products industries.
Acrylic, color plates, ABS board, rubber, plastic, cloth toys, leather, wool, crystal, glass, ceramic tile, jade, bamboo, wood.
Features of desktop laser cutter/laser engraver:
1. Modern smart design. Put on table and work easily.
2. Stronger frame together with HIWIN square rail, high accuracy.
3. Transparent acrylic watching door, easy checking work process.
4. Independent laser tube cabinet, protect tube and easy change.
5. Stainless steel comb working table, avoid rust.
6. Red cross point offers the highest accuracy position.
7. High efficiency tube with stable laser path. 40-90W life time reach to 4000-10000 hours.
8. Professional motion control card offers continue fast curve cutting together with shortest path selection. Shorten work time.
9. U disk offline operation makes work convenient.
CO2 Glass Laser Tube: 50W/60W
50W/60W laser tube is able to do nice engraving on most non-metals: wood, MDF, plywood, acrylic, cloth, leather, glass, marble/stone, plastic, bamboo, double-color sheet, rubber, PVC.
50W/60W laser tube can also be used for cutting thin non-metals: 5mm acrylic, 3mm wood and bamboo, 3mm MDF, cloth, leather, rubber, PVC.
RD Controller and Operation Display
Graphics and files can be transferred both via cable or USB flash.
Laser power supply
supply power for laser tube, ensuring laser tube stable working.
Belt transmission with Taiwan linear guide rails
Anodized aluminum blades table
It is used for holding hard materials/items, such as wood, acrylic, stone, glass, book, box, etc.
Alternative honeycomb table
It is used for holding soft materials, like cloth, leather, tower, foam, sponge, paper, etc.
Stepper motor is with ratio gear to get smoother cutting curve.
Water cooling system
Water pump for laser tube cooling, protecting the laser tube from high temperature, and lasting laser tube lifetime.
Air compressor blowing compressed air to laser head, cooling the item/material being engraved/cut.
Machine rear socket
convenient connection for air compressor and water cooling system.
Three layers for desktop laser cutting/engraving machine table
There are 3 layers for installing the machine table. You can choose different layers to put the machine table according your product/item height/thickness.
Projects of desktop laser cutter/laser engraver:
Package of desktop laser cutter/laser engraver:
STYLECNC SERVICE for desktop laser cutter/laser engraver:
1. The whole desktop laser cutter/laser engraver: one year
2. Laser tube
40W for 5 months.
60W for 6 months.
RECI 80W, 100W, 130W, 150W for 10 months (this is what laser tube supplier offer to us).
3. Laser lens and mirrors of desktop laser cutter/laser engraver: for one month
If the accessories are broken because of quality problems during warranty time, we will change it by free.
4. 24 hour technical support online like skype, whatsapp and remote, you can calling us if urgent.
5. We offer free training in our factory, and our engineers available to service machinery overseas, but the round-trip air tickets, hotel and meals for the engineers should be paid by our buyer.
I bought the laser engraver back in May. While I had a learning curve on using the the laser. Make sure you have plenty of cool water and the pump is working. Otherwise you don't have a laser any more.
STYLECNC was especially helpful; answering questions, software issues, user's errors. I would recommend dealing with this company again