Monday To Saturday

8:30 AM - 6:00 PM

Contact Us

export@stylecnc.com

SUPPORT & ORDER86-531-83161518
Last Updated on Dec 07, 2023 by 3 Min Read

How to Choose Stepper Motor for CNC Machine?

How to Choose Stepper Motor for CNC Machine?

When choosing a stepper motor for your CNC machine, you can choose according to the following 7 steps, so as to avoid the trouble caused by improper selection. The details are as follows, for reference only.

Step 1. Selection of stepper motor torque.

The holding torque of a stepper motor is similar to what is called "power" by a conventional motor. Of course, there are essential differences. The physical structure of the stepping motor is completely different from AC and DC motors, and the output power of the motor is variable.

Which type of motor is usually selected according to the required torque (that is, the torque of the object to be driven).

Under normal circumstances, if the torque is below 0.8N.m, choose 20, 28, 35, 39, 42 (the diameter or squareness of the motor body, unit: mm); if the torque is around 1N.m, choose 57 motors. When the torque is several N.m or greater, stepper motors with specifications of 86, 110, 130, etc. should be selected.

Step 2. Selection of stepper motor speed.

Special consideration should also be given to the speed of the motor. Because the output torque of the motor is inversely proportional to the speed. That is to say, at low speed (several hundred revolutions per minute or lower, its output torque is relatively large), the torque at high speed rotation (1000 rpm--9000 rpm) is very small. Of course, some working conditions require high-speed motors, and it is necessary to check the coil resistance, inductance and other indicators of the stepping motor.

To measure. Choose a motor with a slightly smaller inductance, as a high-speed motor, you can get a larger output torque. Conversely, when low speed and high torque are required, it is better to choose an inductance of more than ten or tens of mH, and a larger resistance.

Step 3. Selection of no-load starting frequency.

The no-load starting frequency of the stepping motor is usually called "no-load starting frequency". This is an important indicator for choosing a motor. If it is required to start and stop frequently in an instant, and the speed is around 1000 rpm (or higher), usually "accelerated start" is required.

If direct start is required to achieve high speed operation, it is best to choose a reactive or permanent magnet motor. The "idling frequency" of these motors is relatively high.

Step 4. Phase number selection.

The selection of the number of phases of the stepper motor, this content, many customers pay little attention to it, and most of them buy it casually. In fact, motors with different phase numbers have different working effects. The more the number of phases, the smaller the step angle can be made, and the vibration during work is relatively

smaller. In most occasions, two-phase motors are used more. In the working environment of high speed and high torque, it is more practical to choose a three-phase stepping motor.

Step 5. Use the environment to select.

Select special stepper motors according to the environment in which the stepper motors are used, which can be waterproof and oil-proof, and can be used in some special occasions. For example, underwater robots need water motors. For special-purpose motors, it is necessary to select them in a targeted manner.

Step 6. Whether special specifications are required according to your actual situation.

For stepping motors with special specifications, please communicate with us, and process and order within the range allowed by technology. For example, the diameter, length, extension direction, etc. of the output shaft.

Step 7. If necessary, it is best to further communicate and confirm the model with the technical engineer of the manufacturer.

If necessary, it is best to communicate further with the technical engineer of the manufacturer, so as to confirm whether the stepper motor you want to choose can meet all the indicators you require.

Further Reading

Which CNC Router is Best for Woodworking?
Mar 18, 2024 7 Min Read

Which CNC Router is Best for Woodworking?

Looking for the best CNC router machine or table kits for 2D/3D woodworking? Find and explore STYLECNC picks of most popular CNC woodworking machines in 2024 for modern furniture making, cabinet making, door making, sign making, wood crafts and some custom woodworking projects.

CNC Post Processor Files Free Download
Mar 12, 2024 3 Min Read

CNC Post Processor Files Free Download

Need post-processor files for CAM software with CNC machining? Here is a list of the most common CNC post-processing files available for free download and use.

16 Most Popular CNC Machines - Which One Is Right for You?
Jan 22, 2024 14 Min Read

16 Most Popular CNC Machines - Which One Is Right for You?

You can meet 16 most popular types of cnc machines to choose from in 2024, including mills & machining centers, lathes & turning centers, drilling machines, boring mills & profiles, edm machines, punch presses & shears, flame cutting machines, routers, water jet, laser machines, cylindrical grinders, welding machines, benders, winding machines, spinning machines, and plasma cutters.

How To Choose CNC Machine Tools for Beginners?
Jan 17, 2024 7 Min Read

How To Choose CNC Machine Tools for Beginners?

Are you looking for CNC machine tools for your projects & plans? In this article, we will tell you how to choose the right tools for turning, milling, cutting.

What is G-code for CNC Programming and Machining?
Jan 17, 2024 3 Min Read

What is G-code for CNC Programming and Machining?

G-code is a type of easy-to-use preparatory computer numerical control programming language used in CAM software to control a CNC machine to work automatically.

Weihong NcStudio CNC Controller V5.5.60 ENGLISH Setup
Jan 17, 2024 2 Min Read

Weihong NcStudio CNC Controller V5.5.60 ENGLISH Setup

Weihong NcStudio CNC Machine Vision Controller V5.5.60 ENGLISH support functions of Advance Start, Breakpoint Resume, MPG Wizard, Reverse Cutting, and more.

Post Your Review

1 to 5-star rating

Share Your Thoughts And Feelings With Others

Click To Change Captcha